Shinnoki prefinished panels are made up of 2 layers of veneer, with an 18 mm - 11/16” thick MDF in between. This range of wood veneered panels does not need any further finishing. There is almost no limit to the ways it can be used, from homes and offices, to bars and restaurants. Discover our accessories for finishing touch. 

Depending on your needs and purposes, Shinnoki panels come in two different executions:

The very best that Shinnoki has to offer. Both sides of the panel have Shinnoki quality veneer, for the most harmonious look available.

Shinnoki quality veneer on the front side. The back has the Shinnoki look and feel, while allowing for a bit more character in the veneer.

Size

2790 x 1240 x 19 mm (4' x 9' x 3/4")  

Composition

Top layer of real wood veneer stained and UV protected with six layers of UV-lacquer, applied sequentially by means of a rolling technique and intermediate curing; a core of MDF with a high density of 700 kg/m³ (±50 kg/m³) and a backing layer of veneer. 

Bonding

The HPLT (High Pressure Low Temperature) press procedure used by Decospan guarantees the best quality for each panel. The process follows the DSI-method, ensuring complete saturation of the wood fibers and a significantly tight bond.  

Finishing

Stained with water-based colorants and protected with six layers ultra-low emitting acrylate urethane UV-cured varnish (99.5% solids), applied sequentially by means of a rolling technique and intermediate curing; mat finish (2 ±1), semi-mat finish (7 ±3).  

Protection

Panels made with our Exclusive execution have removable transparent protective foil on both sides. Panels made with our Premium execution have removable transparent protective foil on the front side and green protective foil on the back side. 

Packaging

25 panels per pack. 

Gross dimensions per pack: 

2800 x 1250 x 580 mm (49.2” x 110.2” x 22.8”). 

Gross weight per pack: 1200 kg (2646 lbs)